The future of
chiptuning
Thirty years inventing the technology that defines ECU recalibration. Alientech hardware, software and training, with EMOTECH’s close support in Spain.
Powergate
ECM Titanium
Alientech Academy
KESS3
Professional ECU and TCU programming via OBD, Bench and Boot. All in a single tool.
Three years of planning and thirty of experience converge in the most advanced engineering achievement ever created for professional chiptuning. KESS3 is the only programmer on the market offering full ECU and TCU access via OBD, Bench and Boot in a single interface, compatible with over 12,000 engine and transmission control units.
Cars, motorcycles, tractors, trucks and boats: if it has an ECU, KESS3 reads and writes it. Across more than 100,000 vehicles, with over 3,000 communication protocols, available in 9 languages.
+3.000 protocolos
+100.000 vehicles
9 idiomas
Car · Bike · Tractor · Truck · Marine
Modo OBD
Access all FLASH memory data through the vehicle’s standard diagnostic connector. Reads & writes without opening the ECU or removing any component. The fastest, non-invasive method for chiptuning.
Modo Bench
Connects directly to the ECU connector out of the vehicle to access data written in the unit. Read, write and clone without opening the ECU. Ideal for vehicles with a protected ECU or no viable OBD access.
Modo Boot
With the control unit open, discover and edit all data in every system memory. The deepest access possible: KESS3’s Boot mode has no limits in compatibility or read depth.
Master
Total independence: read and write any file type, edit its values with your preferred recalibration software. No middlemen, no operation limits.
Slave
Work backed by a network of Master chiptuners who create the modified file you’ll write. Ideal for workshops that don’t develop their own maps but offer the service to their customers.
Dealer Network
Build your own network of Slave collaborators and lead a community that operates efficiently in the market. You set the rules, distribute the maps and control the business.
Military-inspired case in recycled plastic: top compartments, a pressure valve for air travel and a snap-lock closure. KESS3 travels with every accessory you need to work anywhere.
Conecta
Plug KESS3 into the vehicle’s OBD, the test bench, or in Boot mode directly to the open ECU.
Lee
KESS3 reads the vehicle’s original memory. The file is saved for future comparison or restoration.
Modifica
With ECM Titanium or other recalibration software, edit the power, torque, consumption or emissions maps.
Escribe
KESS3 flashes the modified file to the ECU. The vehicle starts with the new map active. Immediate result.
The power test inside KESS3. Through the OBD port and built-in GPS, get real power and torque figures as you drive. Every road test becomes a tangible figure to certify your work to the customer. Exclusive to Alientech Suite.
Exclusivo Alientech Suite
DataLogger
Real-time data logging and analysis · Built into AlientechSuite
DataLogger is the data-logging feature built into AlientechSuite. It continuously records ECU parameters — engine speed, pressure, temperature, air-fuel ratio — while the vehicle runs in real conditions.
Turn every road test from intuition into measurement: workshops can validate calibrations, diagnose performance issues and compare engine evolution before and after each modification.
Real-time monitoring
Switch between graphs and numeric values. Set alert thresholds for each signal and spot abnormal values during the test.
GPS logging
Measure speed, distance and altitude. OBD data is geolocated on a map for full analysis of each driving session.
Event markers
Up to 3 markers while recording to pinpoint key moments: 0-100 launch, full boost, anomaly detection.
Cloud dashboard
Sessions upload automatically to the Alientech Dashboard. Share, analyse and export the data in CSV format.
No extra hardware. DataLogger uses the KESS3 interface directly — no extra devices, no additional installs. Available with an active AlientechSuite subscription.
Exclusivo Alientech Suite
Powergate
Reprogram the ECU and TCU of any vehicle straight from your smartphone.
Powergate is the first and only device on the market that lets you reprogram a vehicle’s ECU and TCU straight from your smartphone — no computer, no workshop, in minutes. The same protocol technology as KESS3, in a compact format connected via OBD and controlled over Bluetooth from the official app for Android, iOS and Huawei AppGallery.
For the professional workshop, Powergate is the ultimate customer-loyalty tool: the end user carries in their pocket the device that lets them switch maps anytime, return to stock in one tap, and stay connected with the chiptuner who set up their vehicle.
Android · iOS · Huawei
Powergate Cloud
Skin personalizada
Mismos protocolos as KESS3
Up to 4 setups
Stage 1 Eco, Stage 2 Sport, Stage 3 Race and a fully custom map. The original file always on hand: the user returns to the factory map in a single tap from the app.
Powergate Cloud
Online database with automatic calibration-file matching. Several Powergates active on the same account, one modification distributed. More efficiency and more revenue for the workshop.
Powergate Manager
Professional control panel to manage sessions, devices and customers from a single dashboard. Monitor in real time all the activity across your network of registered Powergates.
Skin personalizada
Your brand inside the customer’s app. Logo, colours and corporate look: your workshop’s Powergate is unique, distinctive and builds lasting loyalty.
6 LEDs.
6 estados.
The LED built into the Powergate shows the exact operation status in real time. No screen, no extra cables: a language of light the professional learns in minutes.
The pro’s
dashboard
Powergate Manager is the web platform for workshops managing multiple Powergates. From a single panel you access all active sessions, manage each customer’s devices and distribute calibration files across your whole network of registered Powergates.
Sesiones activas
Monitor in real time all the reprogramming activity across your customer network.
Device management
Register and manage multiple Powergates from a single Manager account.
File repository
Store and distribute calibration files to every device in your network.
Statistics
Activity reports, session counts and the status of every registered Powergate.
Engine &
transmission.
Powergate doesn’t just handle the engine ECU — it also programs the TCU (Transmission Control Unit) on automatic-gearbox vehicles. With Alientech’s proprietary communication protocols, you reach transmission parameters other systems on the market can’t detect.
- Reads & writes the vehicle’s original ECU via OBD with nothing to remove
- TCU programming on vehicles with DSG, PDK and equivalent automatic gearboxes
- Up to 4 maps custom maps stored simultaneously on the device
- ALIEN_id identification: the Powergate stays linked to the specific vehicle
- Back to stock in one tap from the app, anytime
Descarga
the app.
The official Powergate app is free on every platform. Intuitive interface, continuous updates and Alientech technical support. Over 98,000 App Store ratings at 4.9 out of 5 — the best-rated chiptuning tool on the market.
ECM Titanium
The performance configurator for motor vehicles. Alientech’s portable professional recalibration software.
ECM Titanium is the portable recalibration software developed by Alientech: connect it to your PC via the USB dongle and start working straight away. Independently view and edit the management parameters of any engine and automatic-transmission calibration file.
The driving experience can be fully tailored to your needs. It’s not only about more torque and power — fuel savings, emissions correction and ECU cloning give ECM Titanium versatility unmatched in the professional market.
Associate a Driver with your original read and work on the maps preselected by Alientech’s technicians, or go deeper with the full 2D or HEX view of the file. Your drivers are yours forever — even offline.
Vistas 2D, 3D y HEX
Portable · USB dongle
Engine · Transmission
Car · Bike · Truck · Tractor · Marine
Read with KESS3
Use KESS3 to read the vehicle’s ECU and get the original file (.bin or .hex).
Abre en ECM
Open the file in ECM Titanium and select the Driver matching that specific ECU.
Edit maps
Work on the selected maps in 2D or 3D view: pressure, injection, ignition, turbo…
Write with KESS3
Save the modified file and flash it to the vehicle’s ECU with KESS3. Immediate result.
No limitsECM Titanium Full
- Unlimited reprogramming with no per-operation cost
- Up to 100 new driver downloads per day
- Turismos, motos, tractores, camiones y embarcaciones
- Up to 5 original files and 3 new drivers on demand
- Dedicated Alientech technical support
- Automatic updates included
Tailored to youECM Titanium Credits
- Pay only for the operations you want
- Ideal for units outside your usual specialism
- Perfect for one-off or low-frequency jobs
- Top up credits when you need them, no commitment
- Full control of your monthly spend
- Same driver database as the Full version
Drivers available in the ECM Titanium database, built by Alientech’s technicians with precise naming for each map. Each Driver is a working map optimised for a specific ECU. Download the ones you need, save them locally and work offline with your USB dongle.
Drivers lifetime
Training
Alientech Academy · Official chiptuning training, online and in person, with certificate.
Alientech’s official training platform, available in Spain through EMOTECH: complete preparation in ECU and TCU remapping, with two levels of specialisation, certified professional trainers, classes worldwide and an official Alientech Academy certificate that recognises your competence in the sector.
Online o presencial
Professional trainers
Certificado Alientech Academy
Petrol · Diesel · Bikes
Are you an enthusiast?
Start from scratch and become a chiptuning professional with a programme tailored for those taking their first steps in ECU recalibration.
Are you a professional?
Stay ahead of the competition: deepen your technique with highly specialised knowledge and certify your level with Alientech Academy’s official recognition.
The Official Alientech Academy Certificate is the recognition that backs your training in front of customers and companies in the sector. A document with real value in the professional chiptuning market, issued directly by Alientech to the students who complete the programme.
Certificado official Alientech
Want to know dates, syllabus or prices for the next Alientech Academy courses in Spain? Ask us, no obligation — as official distributors we give you priority access to available places.
Shall we take your workshop
to the next level?
We advise you on the Alientech product that best fits your business — KESS3, Powergate or ECM Titanium — and support you with Alientech Academy training so you get the most from your investment.